BSX, The Trailer for general use
Quality
In a word, that is the trademark of Anssems Trailers. These trailers for general use are the perfect solution when high priority is given to stability, safety, optimal payload, multifunctionality and user-friendliness. Advanced technologies have been used for the development of Anssems trailers and, of course, they have been substantially tested - including on a test course and road simulator. See specification chart.
Stability
The steel frame of the trailers is robot-welded and hot-dip galvanised. Because the V-shaped pole of trailers with a brake system consists of a box profile with a length of 145 cm they are very stable. The poles have been EC approved. The box-profile frame consists of solid ladder rack and railing, resulting in a very stable frame at all times. We think this is important as it makes the basis of a good trailer.
The axles and coupling or the overrun brake that are mounted are high-grade quality. Upon choosing the axles, ample reserve has been provided for. Because of this the maximum gross weight of the axles is higher than the maximum gross weight of the trailer. Thus type BSX 1300 has been equipped with one axle with a gross weight of 1,500 kilos and BSX 2000 has been equipped with two axles with a gross weight of 1,300 kilos each. The trailer floor is extremely tough and suited for any job imaginable. Two longitudinal runners and several cross girders carry one 15-mm wooden sheet, providing perfect support.
Safety
Anssems Trailer feels very strongly about safety - not just with regard to solid construction, but also visibility to other road users. The lighting, which is mounted in compliance with EC norms, includes side marker lights - far superior to reflectors. And these lights are still visible with a folded down tailboard. So if you have to load in darkness the hazard lights are still visible.
Optimal payload
Despite the strong steel frame the unladen weight of our trailers is remarkably low. The result is an optimal payload. The low unladen weight is realised by meticulous selection of materials used in construction. The utility trailers are equipped with aluminium sides, resulting in considerable reduction of weight.
Multifunctional
You can transport all sorts of loads with Anssems utility trailers. The sides (with a height of 35 cm) allow for a high volume, so that loose items can be easily loaded. Carrying long items is not a problem either, because the headboard and the tailboard can be easily folded down. The headboard rests on the pole, the tailboard on two pullout beams, while the lighting remains visible. Thus there is always ample space to safely transport long items.
User-friendliness
The solid ladder rack and railing offer a good and safe way to tie down your load. Several brackets have been mounted which can conveniently be used for tension bolts or rope. All these trailers are equipped with a jockey wheel. Trailers without a brake system are equipped with a normal jockey wheel, whereas utility trailers with brake system are equipped with a strong retractable jockey wheel. The jockey wheel makes hooking and unhooking easy and provides good manoeuvrability.
Finally, besides their low weight the aluminium sides have another major advantage. They do not discolour even after years of usage. The trailer will keep its appearance throughout time. In short: you are worth being looked at with Anssems trailers.
|
